- On-Line Store
- Reed Switch Module for track magnets
Reed Switch Module for track magnets
This little module will greatly simplify the mounting of two reed switches used to trigger your sound board via track magnets. (e.g. horn or whistle on the right, bell on the left).
Two reed switches mounted at the proper spacing (1.0"), with a 3-wire cable. Designed for mounting under a truck, with the hole in the middle providing access to the bolster screw. You can glue or screw the module to a shim of the appropriate size to position the reed switches just above the rail.
Upon activation with magnets, SW1 to COM closes, or SW2 to COM closes. Wire directly to your sound board (MyLocoSound, Phoenix, etc.).