Wireless Track Mounted Reed Switch and Magnet
For use with our APTC (All Purpose Train Control) and TrackSide R/C (6th Generation).
While there are four wires required; two for our Track Mounted Reed Switch, and two to the track for power, this switch eliminates a long run of wire from the APTC to the location of the reed switch. It contains a small radio transmitter that send a signal to the APTC when the reed switch closes.
Mount the magnet on loco or rolling stock to trigger the reed switch.
Power directly from the track or any 7-25VDC battery.
Note: Requires an APTC or TrackSide R/C that was ordered WITH the wireless reed switch package. This reed switch will be in addition to the one you already have.